Unique edition of 50 units
Movement Hand-wound mechanical, exclusive Panerai OP XXV calibre, 12¾ lignes, 22 jewels, Glucydur® balance, 18,000 alternations/hour. Incabloc® anti-shock device. Swan’s neck regulator. Power reserve 55 hours. Côtes de Genève decoration on the bridges.
Functions Hours, Minutes, Small Seconds, Chronograph with two counters
Case Diameter 45 mm, Polished Platinum
Bezel Polished Platinum
Back See - through sapphire crystal
Dial Ivory with luminous dots and hour markers. Minute counter at 3 o’clock, seconds at 9 o’clock, central chronograph hand. Tachymeter scale on the edge of the dial.
Water Resistance 5 bar (~50 metres)
Strap Alligator, Antique brown, Ecru, 24/22 MM Standard
* The trademark Velcro® and Coramid® are not property of Officine Panerai.
* The trademark Velcro® and Coramid® are not property of Officine Panerai.
Officine Panerai presents a new chronograph of the highest quality, incorporating a fascinating combination of design, technology and history: the Radiomir 1940 Chronograph, available in platinum (PAM00518). In the new chronograph the Radiomir 1940 case, 45 mm in diameter, has the simple, elegant lines developed by Panerai in about 1940, the time when the classic cushion case with the wire loop strap attachments of the first Radiomir started to acquire the more massive proportions of the Luminor 1950 case. Every detail of the 1940 case has a polished finish, including the two push-buttons controlling the chronograph functions, the cylindrical winding crown and the bezel. This bezel frames a crystal made of Plexiglas®, a material similar to that used in the original models created by Panerai for the Royal Italian Navy. The dial of the new Radiomir 1940 Chronograph is a new and original design, inspired by the history of the brand but also by the function of the watch. The platinum version has the ivory dial, with simple baton or dot hour markers. The latter has a dial with the sandwich structure, formed of two superimposed plates with the luminous material between them, visible through holes corresponding to the hour markers and thetachymeter scale for calculating average speed and the two chronograph counters. The movement of the new Radiomir 1940 Chronograph is the OP XXV calibre, developed on a Minerva 13-22 base. The Minerva manufacture has had historic links with Panerai since the 1920s, when the Swiss manufacturer was a supplier to the Florentine watchmaker. The new Radiomir 1940 Chronograph is produced in a unique edition limited to 50 examples for the platinum version and It’s supplied with an alligator strap and are water-resistant to a depth of 5 bar (~50 metres).
Platinum is a rare metal, one of the rarest and most valuable in the world: to obtain just a few grams, for example, it is necessary to mine and process up to ten tonnes of rock. Processing this raw material and turning it into an ingot of platinum takes five months of work, while in the case of gold only three tonnes of rock and five weeks of work are needed. When it was discovered in Colombia in 1750, the similarity of platinum’s appearance to silver gave it its name - plata in Spanish means “silver” - but in terms of value and simplicity of working, the two materials are very different.
Officine Panerai uses 950 platinum (Pt950 Ru, 95% pure platinum) and its specific weight is 11% heavier than 24K gold. This alloy is recommended for machining, but it is not suitable for casting and cannot be hardened by heat treatment. Ductile, malleable and corrosion-resistant, platinum requires a long, complex working process. Stamping a platinum case, for example, requires a specially calibrated press.
The tooling used is subject to greater wear, and meticulous cleaning of the technical instrumentation is required. The polishing stage is particularly complicated and very different from that used for gold, because of the particular characteristics of this material. It has to be carried out entirely by hand, since it cannot be done using automatic tools. The engraving stage is similarly very complex.
Platinum has a good level of hot and cold deformability. Air annealing can be carried out without difficulty. It is advisable to limit the number of times the metal is annealed and to carry out preliminary hardening of at least 30%. The time and temperature of annealing must be controlled to prevent enlargement of the grain (“orange peel” effect).
Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.
Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.
Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.
CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth.
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.
CHOOSE YOUR WISHLIST
Contact the Concierge for any queries related to the products
SELECT YOUR COUNTRY TO CONTACT THE CONCIERGE
Or send an email
International websiteEnglish Italiano 简体中文 繁體中文 日本語 Français Español Deutsch Русский
To complete the purchase, you will need to contact the concierge