back to main menu
COLLECTIONS
back back back

© 2014 OFFICINE PANERAI

P.I. 12155270155

FIND YOUR PANERAI

FIND YOUR PANERAI

MOVEMENT
CASE
FUNCTION
CASE DIAMETER
CASE MATERIAL
DIAL COLOUR

WATCH COLLECTION

LUMINOR 1950 3 DAYS POWER RESERVE

MOVEMENT

Hand-wound mechanical, Panerai P.3002 calibre, executed entirely by Panerai, 16½ lignes, 6.3 mm thick, 21 jewels, Glucydur® balance, 21,600 alternations/ hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 208 components.

FUNCTIONS

Hours, minutes, small seconds, power reserve indicator, seconds reset.

CASE

Diameter 47 mm, AISI 316L polished steel.

BEZEL

Polished steel.

BACK

See-through sapphire crystal.

DEVICE PROTECTING THE CROWN

(protected as a trademark) Brushed steel.

DIAL

Black with luminous Arabic numerals and hour markers. Seconds at 9 o’clock, power reserve indicator at 4 o’clock.

CRYSTAL

Sapphire, formed of corundum, 3 mm thick. Anti-reflective coating.

WATER-RESISTANCE

10 bar (~100 metres).

STRAP

PANERAI personalised leather strap and large-size brushed steel buckle. Supplied with a second interchangeable strap and a steel screwdriver.

 

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

PAM00423 LUMINOR 1950 3 DAYS POWER RESERVE

THE LUMINOR MARINA 1950 3 DAYS AND THE LUMINOR 1950 3 DAYS POWER RESERVE EXPRESS THE EXCELLENT COMBINATION OF VINTAGE DESIGN AND TECHNOLOGY WHICH MAKES PANERAI WATCHES UNIQUE. The special design of the Luminor 1950 case used by the two models is inspired by a rare, historic watch which is notable for the pronounced rounding of the cusps of the caseband. This detail recalls a stage of transformation, which took place in the 1940s, from the classic Radiomir cushion case to that of the Luminor.

 The Luminor Marina 1950 3 Days and the Luminor 1950 3 Days Power Reserve are both fitted with the new P.3001 and P.3002 manufacture calibres, which are distinguished from each other by the different ways in which the power reserves is indicated. In the P.3001 the power reserve indication is located on the bridge of the movement, and is therefore visible through the crystal on the back, while in the P.3002 the indicator appears on the dial. With a diameter of 16½ lignes, the two calibres have in common the typical structure of large bridges, two spring barrels giving a power reserve of three days and a balance wheel 13.2 mm in diameter with variable inertia, enabling the rate of the watch to be adjusted through external screws on the rim. Both also have the seconds zero reset device and a mechanism for the rapid adjustment of the hour, enabling the hour hand to jump one hour at a time, without interfering with the movement of the minute hand or the running of the watch.

 
 
Luminor 1950 3 Days Power Reserve PAM00423  - Collection LUMINOR 1950 - Watches Officine Panerai
Luminor 1950 3 Days Power Reserve PAM00423  - Collection LUMINOR 1950 - Watches Officine Panerai

STEEL

AISI 316L 1.4435 stainless steel is Officine Panerai’s material par excellence since it is highly resistant to corrosion and is hypoallergenic, making it ideal for contact with the skin.  
The Panerai watches created for the Italian Navy were made of austenitic stainless steel, a reliable material that was also resistant to the extreme environmental conditions in which the commandos operated. AISI 316L, a specification of the American Iron and Steel Institute, is an austenitic stainless steel alloy with a chromium content of 16–18%, 11–14% nickel and 2–3% molybdenum.
Officine Panerai uses the low-carbon variant of this alloy: the lower carbon content of the steel improves its welding qualities where the metal’s thickness is 6mm or less. The excellent technical qualities of this material make it an essential element of every new Officine Panerai collection.

 

P.3002

Hand-wound mechanical, executed entirely by Panerai, 16½ lignes, 6,3 mm thick, 21 jewels, Glucydur® balance, 21.600 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days with arc-shaped indicator, two barrels, seconds reset device. 208 components.

READ MORE ABOUT THIS MOVEMENT


Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.


WATER-RESISTANCE
Have your watch checked periodically for water-resistance by an Authorized Panerai Service Centre and restore it every two years with regular servicing, or whenever the watch has to be opened. Restoring the watch’s water-resistance necessarily involves replacing the seals so as to ensure the maximum water-resistance and security. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the season of underwater activities begins.


THE MOVEMENT
Have the movement of your watch checked periodically by an Authorized Panerai Service Centre so as to maintain its perfect operation. If the watch tends to gain or lose time significantly, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.


CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing your Panerai watch with soap and warm water, using a soft brush. After this operation, and also after bathing in the sea or a swimming pool, carefully rinse the watch with clean water. All Panerai watches can be cleaned with a soft, dry cloth.


THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or to expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each bathe in the sea or a swimming pool, carefully rinse the strap with clean water. The leather strap is made from leather which has not been chemically treated, which gives it a very natural, soft feel. As a result of its characteristics, the colour and form of the leather tend to change with the passage of time while maintaining all of its beauty. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use skins coming from fragile or endangered species taken from the wild.

BRACELETS AND STRAPS

Officine Panerai offers a range of high quality accessories which meet very stringent production standards, the result of innovative materials research and new finishes which combine the richness of the past with Panerai's continuous development, making the range of accessories as exclusive as its watches.
TYPE OF BRACELETS OR STRAPS
AVAILABLE COLOUR
Luminor Alligator
Luminor Alligator nubuck
Luminor Assolutamente
Luminor Calf Cashmere
Luminor Calf Rugby
Luminor Caoutchouc
Luminor Ranger
Luminor Vintage
TELL A FRIEND
SEND