back to main menu
COLLECTIONS
back back back

© 2014 OFFICINE PANERAI

P.I. 12155270155

FIND YOUR PANERAI

FIND YOUR PANERAI

MOVEMENT
CASE
FUNCTION
CASE DIAMETER
CASE MATERIAL
DIAL COLOUR

WATCH COLLECTION

LUMINOR MARINA 1950 3 DAYS AUTOMATIC TITANIO

MOVEMENT

Automatic mechanical, Panerai P.9000 calibre, executed entirely by Panerai, 13¾ lignes, 7.9 mm thick, 28 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 197 components.

FUNCTIONS

Hours, minutes, small seconds, date.

 

CASE

Diameter 44 mm, brushed titanium.

BEZEL

Polished titanium.

BACK

See-through sapphire crystal.

DEVICE PROTECTING THE CROWN

(protected as a trademark) Brushed titanium.

DIAL

Brown with luminous Arabic numerals and hour markers. Date at 3 o’clock, seconds at 9 o’clock.

CRYSTAL

Sapphire, formed of corundum, 2.6 mm thick. Anti-reflective coating.

WATER-RESISTANCE

30 bar (~300 metres).        

STRAP

PANERAI personalised titanium bracelet with vertical brushed finishing and polished surface between the links. Titanium/steel buckle. Supplied with a tool for changing the bracelet and a steel screwdriver. 

 

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

TITANIUM

Light, strong and hypoallergenic, the remarkable physical, mechanical and corrosion-resistant qualities of titanium have made this metal one of the most valued in fine watchmaking, as well as a material of choice for the military, aeronautical and aerospace industries. From the engineering viewpoint, its lightness makes it an exceptional material: titanium has the same strength as steel but is 40% lighter.

Titanium is impervious to corrosion by salt water or the marine environment and it has exceptional resistance to a wide range of acids, alkalis, natural waters and industrial chemical products.  Although in nature it is the ninth most abundant element, and, after aluminium and iron, the third most common metal used in mechanical applications, titanium is found only in the form of oxides, hence the difficulty of refining the raw material and its consequent prestige.
Officine Panerai uses two different types of titanium for various kinds of components: Grade 2 and Grade 5.
 • Grade 2: titanium with a high oxygen content and greater strength than Grade 1. It is widely used and offers the best compromise between strength, corrosion resistance, weldability and moldability. 
 • Grade 5 (Ti 6Al-4V): this alloy can be polished and not just cleaned. It has very high tensile strength but relatively low ductility.  

The working of titanium is a very delicate operation due to the material’s sensitivity to oxidization. If oxidization occurs, the manufacturing process must be restarted.

 

P.9000

Automatic mechanical, executed entirely by Panerai, 13¾ lignes, 7,9 mm thick, 28 jewels, Glucydur® balance, 28.800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels, date. 197 components.

READ MORE ABOUT THIS MOVEMENT


Panerai watches are produced according to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.


WATER-RESISTANCE
Have your watch checked periodically for water-resistance by an Authorized Panerai Service Centre and restore it every two years with regular servicing, or whenever the watch has to be opened. Restoring the watch’s water-resistance necessarily involves replacing the seals so as to ensure the maximum water-resistance and security. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the season of underwater activities begins.


THE MOVEMENT
Have the movement of your watch checked periodically by an Authorized Panerai Service Centre so as to maintain its perfect operation. If the watch tends to gain or lose time significantly, the movement may need to be overhauled. The movements are designed to withstand temperature variations between - 10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.


CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing your Panerai watch with soap and warm water, using a soft brush. After this operation, and also after bathing in the sea or a swimming pool, carefully rinse the watch with clean water. All Panerai watches can be cleaned with a soft, dry cloth.


THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or to expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each bathe in the sea or a swimming pool, carefully rinse the strap with clean water. It is recommended that the strap should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use skins coming from fragile or endangered species taken from the wild.

THE BRACELET
The Panerai bracelet can be washed with soap and warm water, using a soft brush. After this operation, and also after bathing in the sea or a swimming pool, rinse the bracelet carefully with clean water and dry it with a soft, dry cloth. It is recommended that links should be added to or removed from the bracelet by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement.

ATTENTION
Do not use the watch at a depth greater than that indicated.
The presentation case of your Luminor Marina 1950 3 Days Automatic contains: 
 
• Instruction booklet
• Certificates booklet
• Second interchangeable strap (for the alligator or leather strap version only)
• Tool to change the strap/bracelet (only for cases in steel and titanium)
• Steel screwdriver

BRACELETS AND STRAPS

Officine Panerai offers a range of high quality accessories which meet very stringent production standards, the result of innovative materials research and new finishes which combine the richness of the past with Panerai's continuous development, making the range of accessories as exclusive as its watches.
TYPE OF BRACELETS OR STRAPS
AVAILABLE COLOUR
Luminor Alligator
Luminor Alligator nubuck
Luminor Alligator shiny
Luminor Assolutamente
Luminor Calf Carbon Style (Coramid)
Luminor Calf Monte Carlo
Luminor Calf Rugby
Luminor Canvas
Luminor Caoutchouc
Luminor Rivetta/structure
Luminor Textile Trieste
Luminor Buffalo
Brushed steel
Brushed titanium/brushed steel
Brushed titanium/polished steel
Brushed titanium without screws
Brushed steel/polished steel
Brushed titanium/polished surface between the links
Brushed steel/polished surface between the links
TELL A FRIEND
SEND