back to main menu
COLLECTIONS
back back back

© 2014 OFFICINE PANERAI

P.I. 12155270155

FIND YOUR PANERAI

FIND YOUR PANERAI

MOVEMENT
CASE
FUNCTION
CASE DIAMETER
CASE MATERIAL
DIAL COLOUR

WATCH COLLECTION

LUMINOR 1950 10 DAYS CERAMICA

MOVEMENT

Automatic mechanical, Panerai P.2003 calibre, executed entirely by Panerai, 13¾ lignes, 8 mm thick, 25 jewels, Glucydur® balance, 28,800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 10 days, three barrels, seconds reset device. 296 components. 

FUNCTIONS

Hours, minutes, small seconds, date, second time zone, 24h indicator, linear power reserve indicator, seconds reset.

 

CASE

Diameter 44 mm, black ceramic.

BEZEL

Black ceramic.

 

BACK

See-through smoked sapphire crystal. 

DEVICE PROTECTING THE CROWN

(protected as a trademark) Black ceramic.

DIAL

Black with luminous Arabic numerals and hour markers. Date at 3 o’clock, seconds and 24h indicator at 9 o’clock, linear power reserve indicator at 6 o’clock.

 

CRYSTAL

Sapphire, formed of corundum, 2 mm thick. Anti-reflective coating.

WATER-RESISTANCE

10 bar (~100 metres).

STRAP

PANERAI personalised leather strap and large-size matt titanium buckle with special hard black coating. Supplied with a second interchangeable strap and a steel screwdriver. 

 

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

PAM00335  LUMINOR 1950 10 DAYS GMT CERAMICA - 44 MM

THE BLACK, OPAQUE CERAMIC, THE 10-DAY POWER RESERVE AND THE SECOND TIME ZONE INDICATOR ARE DISTINCTIVE ELEMENTS OF THE LUMINOR 1950 10 DAYS GMT CERAMICA – 44 MM. The case of the new Luminor 1950 10 Days GMT Ceramica – 44mm is made of ceramic, a highly technical material that's extremely resistant to corrosive agents and scratches.

In terms of style, the Luminor 1950's case is a faithful reflection of the aesthetic canons of Officine Panerai's historic model, with its crown-protecting drawbridge device, also made of ceramic, whose primary function is to protect the crown from accidental blows. In the centre of the screwed-on titanium back plate is a black sapphire crystal window, giving the movement a brownish tint. The dial has a classic layout with a sandwich structure formed of two superimposed thin plates, linear markings and three large Arabic numerals. The numbers, date and all the hands are highly luminescent, as is the second time zone hand with its arrowhead tip, the day/night indicator hand in the small seconds dial, and the horizontal cursor indicating the watch's remaining power reserve.

 

Luminor 1950 10 Days Ceramica PAM00335 - Collection LUMINOR 1950 - Watches Officine Panerai
Luminor 1950 10 Days Ceramica PAM00335 - Collection LUMINOR 1950 - Watches Officine Panerai

CERAMIC

For the Luminor and Luminor 1950 cases, Officine Panerai uses a high-tech ceramic made of zirconium oxide (ZrO2). The material is made from powder which is isostatically pressed while the final shapes of the various components are formed by grinding. This high-tech ceramic has many different qualities: extreme hardness (up to five times greater than that of stainless steel), resistance to scratches and shocks and its surface has a very high aesthetic impact.


Preparation of zirconia powder
The powder consists of about 80% zirconia powder and 20% of a binding powder. To achieve the black colour, a colour pigment highly resistant to heat is added.


Injection of the mixture into the mould
During the injection process, the zirconia powder with the binder is warmed slightly so that it flows as a liquid substance into the injection machine. This liquid substance is forced under extremely high pressure into the mould that forms the shape of the component. This manufacturing step is called the “green stage”.


Machining during the green stage
The case middle, lever and bridge are machined during the green stage. Since the consistency of the material is still very soft, the components can be shaped by turning, milling and drilling.


Removal of the binder
The binder is removed from the components by a chemical process at a temperature of approximately 100°C. It takes several hours for all the binder to be removed.


Sintering of the ceramic
Over a period of about three days, the components are heated to 1500°C and then allowed to cool down. After this stage, the components consist of 100% zirconia ceramic and have a hardness of 1200HV (5 times greater than stainless steel).


Grinding the ceramic in the hard stage
The grinding phase gives the components their final dimension. In order to achieve the required tolerances, special diamond grinding tools are used. Since the ceramic is extremely hard, the grinding process is very time consuming.


Finishing
The finishing of the ceramic component is carried out by sandblasting.

 

P.2003

Automatic mechanical, executed entirely by Panerai, 13¾ lignes, 8 mm thick, 25 jewels, Glucydur® balance, 28.800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 10 days with linear indicator, three barrels, seconds reset device, date, GMT with 24h indicator. 296 components.

READ MORE ABOUT THIS MOVEMENT

Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.

WATER-RESISTANCE
Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.

THE MOVEMENT
Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.


CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth.

THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.

 

 

 

 

 

BRACELETS AND STRAPS

Officine Panerai offers a range of high quality accessories which meet very stringent production standards, the result of innovative materials research and new finishes which combine the richness of the past with Panerai's continuous development, making the range of accessories as exclusive as its watches.
TYPE OF BRACELETS OR STRAPS
AVAILABLE COLOUR
Luminor Alligator
Luminor Alligator nubuck
Luminor Alligator shiny
Luminor Assolutamente
Luminor Calf Cashmere
Luminor Calf Diving Glove
Luminor Calf Monte Carlo
Luminor Calf Rugby
Luminor Canvas
Luminor Caoutchouc
Luminor Italocalf
Luminor Rivetta/structure
Luminor Vintage
Luminor Buffalo
TELL A FRIEND
SEND