Luminor 1950 3 Days GMT Power Reserve Automatic Acciaio - 44mm

PAM00321

Spotlight

Technical Details

Movement Automatic mechanical, Panerai P.9002 calibre, executed entirely by Panerai, 13¾ lignes, 7.9 mm thick, 29 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels, seconds reset device. 237 components.

Functions Hours, Minutes, Small Seconds, date, GMT, Power Reserve Indicator, Seconds Reset

Case Diameter 44 mm, AISI 316L Brushed Steel

Bezel Polished Steel

Back See - through sapphire crystal

Device protecting the crown (Protected as a trademark) Brushed Steel

Water Resistance 30 bar (~300 metres)

Strap Alligator, Black, Ecru, 24.0/22.0 MM Standard

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

Materials

Steel

AISI 316L 1.4435 stainless steel is Officine Panerai’s material par excellence since it is highly resistant to corrosion and is hypoallergenic, making it ideal for contact with the skin.

The Panerai watches created for the Italian Navy were made of austenitic stainless steel, a reliable material that was also resistant to the extreme environmental conditions in which the commandos operated. AISI 316L, a specification of the American Iron and Steel Institute, is an austenitic stainless steel alloy with a chromium content of 16–18%, 11–14% nickel and 2–3% molybdenum.

Officine Panerai uses the low-carbon variant of this alloy: the lower carbon content of the steel improves its welding qualities where the metal’s thickness is 6mm or less. The excellent technical qualities of this material make it an essential element of every new Officine Panerai collection.

Maintenance

Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.

WATER-RESISTANCE 

Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.  

THE MOVEMENT 

Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.  

CLEANING THE EXTERIOR

To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth. 

THE STRAP

 Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.

Movement

P.9002 calibre

The P.9002 calibre, created entirely by Officine Panerai and used in a series of Luminor 1950 and Radiomir models, is fitted with various functions: it is an automatic calibre with a 3-day power reserve and a unique technical design which makes this movement immediately recognisable. The calibre has a diameter of 13¾ lignes and numerous features: two barrels which guarantee 72 hours of power reserve; a single piece rotor which winds by moving in both directions thanks to an automatic ratchet device; a balance wheel with adjusting screws, oscillating at a frequency of 4 Hz; a date display and a seconds reset device which resets the seconds hand, enabling the watch to be synchronized perfectly with a reference time signal. To house this movement, a specially made version of the Luminor 1950 case has been designed, keeping the proportions of the original but featuring a slightly less convex sapphire crystal which only barely protrudes from the bezel. The P.9002 is a variant of the P.9001 automatic calibre with several additional features: GMT, or rather a second time zone, indicated by a central hand, seconds reset and power reserve indicator.

Read More about this Movement