Luminor Submersible 1950 Amagnetic 3 Days Automatic Titanio - 47mm
PAM01389
Technical Details
Movement Automatic mechanical, P.9010 calibre, executed entirely by Panerai, 13¾ lignes, 6.0 mm thick, 31 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 200 components.
Functions Hours, minutes, small seconds, date, CALCULATION OF IMMERSION TIME
Case Diameter 47 mm, brushed titanium
Bezel Ceramic/Titanium. Anti - clockwise rotating bezel with graduated scale
Back Screw, Titanium
Device protecting the crown (Protected as a trademark) Brushed Titanium
Dial Black with applied luminous hour markers. Date at 3 o’clock, seconds at 9 o’clock.
Crystal Sapphire crystal formed of corundum
Water Resistance 30 bar (~300 metres)
Strap Caoutchouc, Black, -, 26/22 MM Standard
* The trademark Velcro® and Coramid® are not property of Officine Panerai.
In Depth
The Luminor Submersible 1950 Amagnetic 3 Days Automatic Titanio is the latest version of the PAM00389, first anti-magnetic watch produced by Panerai, with a new movement, the P.9010 automatic calibre with a power reserve of three days, and modified design resulting from the reduction in the thickness of the case and the perfecting of some details of the dial. In the Luminor Submersible 1950 Amagnetic 3 Days Automatic Titanio it is the construction which enables its extremely high resistance to magnetic fields: 40,000 A/m (ampère/metre), a figure more than eight times greater than that stipulated by international standards (NIHS 90-10). Such a high limit has been achieved thanks to a special inner case made of soft iron which insulates the movement, forming a Faraday cage which deflects the flux of magnetic fields. The soft iron case is immediately below the dial which is made of the same material. A matt black ceramic disc applied to the rotating titanium bezel set with studs forming a graduated scale for calculating times of immersion. The bezel only rotates anti-clockwise to avoid accidental shocks interfering with the measurement of the times of immersion The black dial has the date at 3 o’clock and the small seconds counter at 9 o’clock with a Panerai blue hand; the linear white hour markers are applied and covered with a luminous substance to ensure excellent visibility at night and underwater. The strap is black, made of rubber with a trapezoidal brushed titanium buckle.
Maintenance
Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.
WATER-RESISTANCE
Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.
THE MOVEMENT
Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.
CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth.
THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.
Movement
P.9010 calibre
The automatic P.9010 calibre, entirely developed and created in the Panerai Manufacture in Neuchâtel, has central hour and minute hands, the small seconds dial at 9 o’clock and the date at 3 o’clock. The energy necessary to accumulate a power reserve of three days – the basic standard for Panerai in-house movements – is stored in two spring barrels whose springs are wound by an oscillating weight operating in both directions. Consisting of 200 components including 31 jewels, the calibre has a diameter of 13¾ lignes and it is 6 mm thick. The balance, fixed by a bridge with twin supports, oscillates at a frequency of 28,800 vibrations per hour (4 Hz). It is associated with the device which stops it as soon as the winding crown is pulled out, enabling the watch to be perfectly synchronised with a reference signal. In the P.9010 calibre the hours can be conveniently adjusted without interfering with the movement of the minute hand, thanks to the device which directly moves only the relative hand in jumps of one hour forward or backwards. This function is very useful when changing time zones or moving between summer time and winter time, and conveniently the adjustment of the hour hand is automatically connected to the date indicator.
CHOOSE YOUR WISHLIST
Officine Panerai
Contact the Concierge for any queries related to the products
SELECT YOUR COUNTRY TO CONTACT THE CONCIERGE
Or send an email
languageoverlay.logo.heading
If you select a different country during a purchase, please save your choice in a wishlist or you will loose your shopping bag content.
IF THE COUNTRY YOU WOULD LIKE TO SHIP IS NOT LISTED CLICK HERE
If you select a different country during a purchase, please save your choice in a wishlist or you will loose your shopping bag content.
Please enter your details below and we will contact you when the Panerai e-boutique is available in your country.
WELCOME
ON THE BASIS OF NAVIGATION INFORMATION WE HAVE SET THE FOLLOWING COUNTRY AND CURRENCY: -
IF YOU WANT TO CHANGE YOU CAN CHOOSE A DIFFERENT SETTING
NOTICE
PLEASE NOTE THAT BY SWITCHING COUNTRY SITE, YOU'LL LOSE ALL ITEMS SAVED IN THE SHOPPING BAG AND IN THE MY ACCOUNT AREA.
GO TO E-BOUTIQUE
