back to main menu
back back back

© 2014 OFFICINE PANERAI

P.I. 12155270155

FIND YOUR PANERAI

FIND YOUR PANERAI

MOVEMENT
CASE
FUNCTION
CASE DIAMETER
CASE MATERIAL
DIAL COLOUR

2011

LUMINOR SUBMERSIBLE 1950 3 DAYS AUTOMATIC BRONZO

Unique edition of 1000 units

MOVEMENT

Automatic mechanical, Panerai P.9000 calibre, executed entirely by Panerai, 13¾  lignes, 7.9 mm thick, 28 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 197 components.

FUNCTIONS

 Hours, minutes, small seconds, date, calculation of immersion time.

CASE

Diameter 47 mm, brushed bronze.

BEZEL

Brushed bronze with polished edges, anti-clockwise unidirectional rotating bezel with graduated scale for calculating the time of immersion and ratchet click at minute intervals.

BACK

See-through sapphire crystal, brushed titanium external ring.

DEVICE PROTECTING THE CROWN

(protected as a trademark) brushed bronze.

DIAL

Green with applied luminous dots and hour markers. Date at 3 o’clock, seconds at 9 o’clock.

CRYSTAL

Sapphire, made from corundum, 4 mm thick. Anti-reflective coating.

WATER-RESISTANCE

30 bar (~300 metres). 

STRAP

PANERAI personalised leather strap and large-size brushed titanium buckle. Supplied with a second interchangeable strap and a steel screwdriver. 

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

PAM00382 LUMINOR SUBMERSIBLE 1950 3 DAYS AUTOMATIC BRONZO- 47MM

THE LUMINOR SUBMERSIBLE 1950 3 DAYS AUTOMATIC BRONZO PROFESSIONAL UNDERWATER WATCH BY OFFICINE PANERAI evokes the world of the sea, the ever-present element in the DNA of the Florentine brand.
A development of the model created more than half a century ago by Officine Panerai for Egyptian Navy commandos, the Luminor Submersible 1950 3 Days Automatic Bronzo - 47 mm is made of bronze, a material that has always been linked to the sea. The bronze chosen by Officine Panerai for the case of the new Luminor Submersible 1950 3 Days Automatic Bronzo - 47 mm is CuSn8, an alloy highly resistant to the corrosive action of seawater and the elements. In addition to its great structural strength, this material maintains its original colouring despite taking on an aged look over time due to its patina. In fact, it is the patina which is the fundamental characteristic of this material - the result of the reaction of bronze to external agents (air, humidity, heat and friction). Rather than altering the properties of the material, it is a testament to its age, making each watch unique and personalised.
The 47mm diameter brushed bronze case is water-resistant to 30 atmospheres (300 metres) and has a unidirectional, anti-clockwise bezel with a sexagesimal graduated scale divided into individual minutes for the first 15 minutes, then every 5 minutes. The characteristic crown-protecting bridge with a lever ensuring the crown itself is perfectly airtight, is also made of bronze. The sapphire crystal case-back, on the other hand, is fixed to the case-middle by means of a titanium ring, a metal chosen for its hypoallergenic properties.
The dial, in a never-before-used dark green, recalls the graphic layout typical of the Luminor Submersible, with applied hour markers instead of the numerals 12 and 6. Protected by a sapphire crystal, the dial features ultra-luminescent skeletonised hands, the small seconds at 9 o'clock and the date symmetrically at 3 o’clock. The Luminor Submersible 1950 3 Days Automatic Bronzo has an automatic P.9000 calibre, designed and produced entirely by Panerai. The P.9000 calibre has a three-quarter plate structure, clearly visible through the transparent case-back, a 13¾ lignes diameter and two barrels, which provide a power reserve of 3 days.

 

 

BRONZE

Bronze has a long history, dating back as far as the second millennium BC. At that time, it was used to produce items such as tools, weapons, musical instruments and armour, being stronger and tougher than its predecessors copper and stone. Bronze consists of copper with a variable percentage of tin. It may also contain varying amounts of aluminium, lead, beryllium, manganese and tungsten, sometimes with silicon and phosphorus as well.
Bronze is very versatile and it is highly valued for its many different uses: in the arts, in sculptures (80% copper and 20% tin) and for making bells (21.5 to 24% tin), the creation of hydraulic systems where the bronze alloy contains 10% of tin and 3% of zinc, and the more recent use of this material for ship propellers, where its high resistance to corrosion by seawater is invaluable. And in the past, since its resistance to corrosive seawater is much greater than that of iron, this alloy was used for the equipment of many yachts of yesteryear: portholes, handrails, cleats, winches and compass binnacles were made of bronze, and it was also used for divers’ helmets.
Its ancient history and its close links with the world of the sea make bronze the material that embodies the core values of Officine Panerai, which uses an alloy of copper and tin in the pure state. In addition to its high structural strength, this material retains its original warm tones while with the passage of time it acquires an aged appearance through the patina that covers it.
This patina is the result of the reaction of the bronze with external agents such as air, moisture, heat and friction. It does not alter the properties of the material, but it is evidence of ageing, giving each piece its own unique personality. The patina of the bronze is its skin: it is a protective layer, and as the surface of the metal becomes covered, it slows down any further oxidation of the metal.

P.9000

Automatic mechanical, executed entirely by Panerai, 13¾ lignes, 7,9 mm thick, 28 jewels, Glucydur® balance, 28.800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels, date. 197 components.

READ MORE ABOUT THIS MOVEMENT

Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.

WATER-RESISTANCE
Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.

THE MOVEMENT
Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.


CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth.

THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.

 

 

 

 

 

BRACELETS AND STRAPS

Officine Panerai offers a range of high quality accessories which meet very stringent production standards, the result of innovative materials research and new finishes which combine the richness of the past with Panerai's continuous development, making the range of accessories as exclusive as its watches.
TYPE OF BRACELETS OR STRAPS
AVAILABLE COLOUR
Luminor Alligator
Luminor Alligator nubuck
Luminor Assolutamente
Luminor Calf Cashmere
Luminor Calf Rugby
Luminor Caoutchouc
Luminor Ranger
Luminor Vintage
TELL A FRIEND
SEND