back to main menu
WATCH COLLECTION
back back back

© 2014 OFFICINE PANERAI

P.I. 12155270155

FIND YOUR PANERAI

FIND YOUR PANERAI

MOVEMENT
CASE
FUNCTION
CASE DIAMETER
CASE MATERIAL
DIAL COLOUR

HISTORIC

LUMINOR 1950 RATTRAPANTE 8 DAYS TITANIO

MOVEMENT

Hand-wound mechanical, Panerai P.2006/3 calibre, executed entirely by Panerai, 13¾ lignes, 9.6 mm thick, 34 jewels, Glucydur® balance, 28,800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 8 days with linear indicator, three barrels. Double column wheel, 356 components.

FUNCTIONS

Hours, minutes, small seconds, linear power reserve indicator, seconds reset, split-seconds chronograph.

CASE

Diameter 47 mm, brushed titanium. Brushed titanium buttons with engraving and polished edges for the chronograph functions at 8 and 10 o’clock.

BEZEL

Polished titanium.

BACK

See-through sapphire crystal.

DEVICE PROTECTING THE CROWN

(protected as a trademark) Brushed titanium.

DIAL

Black with luminous dots and hour markers. Minute counter at 3 o’clock, seconds at 9 o’clock, linear power reserve indicator at 6 o’clock, central chronograph and split-second hands. Chronograph seconds scale on the outer edge.

CRYSTAL

Sapphire, made of corundum, 2 mm thick. Anti-reflective coating.

WATER-RESISTANCE

10 bar (~ 100 metres).

STRAP

PANERAI personalised rubber strap and trapezoidal brushed titanium buckle. Supplied with a second interchangeable strap, a tool for changing the strap and a steel screwdriver.

* The trademark Velcro® and Coramid® are not property of Officine Panerai.

PAM00530 LUMINOR 1950 RATTRAPANTE 8 DAYS TITANIO - 47MM

OFFICINE PANERAI PRESENTS THE NEW LUMINOR 1950 RATTRAPANTE 8 DAYS TITANIO, a sophisticated haute horlogerie model in which the classic Panerai design is perfectly combined with the technical aspects of high quality sports watchmaking. The Luminor 1950 Rattrapante 8 Days Titanio is a split-seconds chronograph with vertical clutch and twin column wheels, and it offers numerous functions that are characteristic of top-of-the range mechanical watchmaking, all assembled in the P.2006 movement, entirely developed and created in the Officine Panerai manufacture in Neuchâtel. The split-seconds function, also known as rattrapante, operates two hands that are superimposed and partially independent: the first is entirely controlled by the button at 8 o’clock, which starts, stops and resets the chronograph hand; the second, controlled by the button at 10 o’clock, is used for measuring partial times or a second event simultaneous with the first. To make it easier and clearer to read, the hand of the small minute counter moves in jumps instead of continuously.
The P.2006 hand-wound movement has a long power reserve of eight days, a traditional duration for Panerai watches. This is achieved by means of a special patented system of three spring barrels. The remaining power reserve can be read on the dial from a linear indicator above the number six. To enable the watch to be synchronised perfectly with a reference signal, the P.2006 movement also has a seconds reset function, which zeroes the seconds hand by stopping the balance wheel until the winding crown has been returned to the running position.
The Luminor 1950 Rattrapante 8 Days Titanio has a brushed titanium case 47 mm in diameter, fitted with the classic lever device which hermetically seals the winding crown to ensure water resistance to 10 atmospheres (equivalent to a depth of about 100 metres). On the back of the case, in the centre of the 12-sided caseback, is a sapphire crystal window through which the elegant finish of the P.2006 movement can be seen. The bezel is made of polished titanium and surrounds a large black dial of great simplicity and sporting elegance. The structure of the dial consists of two superimposed discs with a layer of Super-LumiNova® between them: a type of construction which has been characteristic of Panerai watches since the 1930s, it provides great legibility and visibility even in situations of very low light, such as underwater. The new Luminor 1950 Rattrapante 8 Days Titanio is supplied with a rubber strap. It is part of the of the Officine Panerai Historic collection.

TITANIUM

Light, strong and hypoallergenic, the remarkable physical, mechanical and corrosion-resistant qualities of titanium have made this metal one of the most valued in fine watchmaking, as well as a material of choice for the military, aeronautical and aerospace industries. From the engineering viewpoint, its lightness makes it an exceptional material: titanium has the same strength as steel but is 40% lighter.

Titanium is impervious to corrosion by salt water or the marine environment and it has exceptional resistance to a wide range of acids, alkalis, natural waters and industrial chemical products.  Although in nature it is the ninth most abundant element, and, after aluminium and iron, the third most common metal used in mechanical applications, titanium is found only in the form of oxides, hence the difficulty of refining the raw material and its consequent prestige.
Officine Panerai uses two different types of titanium for various kinds of components: Grade 2 and Grade 5.
 • Grade 2: titanium with a high oxygen content and greater strength than Grade 1. It is widely used and offers the best compromise between strength, corrosion resistance, weldability and moldability. 
 • Grade 5 (Ti 6Al-4V): this alloy can be polished and not just cleaned. It has very high tensile strength but relatively low ductility.  

The working of titanium is a very delicate operation due to the material’s sensitivity to oxidization. If oxidization occurs, the manufacturing process must be restarted.

 

P.2006

Hand-wound mechanical, Panerai P.2006/3 calibre, executed entirely by Panerai, 13¾ lignes, 9.6 mm thick, 34 jewels, Glucydur® balance, 28,800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 8 days with linear indicator, three barrels. Double column wheel, 356 components. READ MORE ABOUT THIS MOVEMENT

Panerai watches are produced to very high standards of quality. It is worth remembering that the mechanical parts run 24 hours a day when used, so the watch must undergo regular maintenance to ensure long life and good operation.

WATER-RESISTANCE Have watch checked periodically for water-resistance by an Authorized Panerai Service Centre and renovate it every two years with regular servicing, or whenever the watch has to be opened. The restoration of water-resistance necessarily involves replacing the seals in order to ensure the maximum water resistance and protection. Where the watch is used in underwater sports activities, it is recommended that it should be checked every year before the underwater activities begin.

THE MOVEMENT
Have the movement of watch checked periodically by an Authorized Panerai Service Centre in order to preserve its perfect operation. If the watch has a tendency to gain or lose time to a significant degree, the movement may need to be overhauled. The movements are designed to withstand temperature variations between -10°C and +60°C (14°F and 140°F). Outside this range of temperatures, operational variations exceeding those set out in the specifications of the movement may be noticed. In addition, there is a risk that the lubricants contained in the movement may deteriorate, resulting in damage to some of its parts.


CLEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing Panerai watch with soap and warm water, using a soft brush. After this operation, and also after immersion in the sea or a swimming pool, carefully rinse the watch with fresh water. All Panerai watches can be cleaned with a soft, dry cloth.

THE STRAP
Panerai straps must be washed in warm water and left to dry. It is important not to dry them on a hot surface or expose them to direct sunlight, because the rapid evaporation of the water could damage their shape and quality. After each immersion in the sea or a swimming pool, carefully rinse the strap with fresh water. It is recommended that the strap and the buckle should be replaced by an Authorized Distributor or a Panerai Service Centre, in order to avoid any problems caused by incorrect replacement. Only an Authorized Distributor or Panerai Service Centre can guarantee the use of genuine Panerai straps, properly designed to fit the dimensions of the case and manufactured according to the quality standards of the brand. All alligator leather used by Officine Panerai comes from farms in Louisiana, USA. Officine Panerai’s suppliers have committed to the highest standard of responsibility and have given their assurance that such farms in Louisiana contribute to the stable growth of wild alligators, thus protecting this endangered species. Panerai does not use leather coming from endangered species taken from the wild.    

BRACELETS AND STRAPS

Officine Panerai offers a range of high quality accessories which meet very stringent production standards, the result of innovative materials research and new finishes which combine the richness of the past with Panerai's continuous development, making the range of accessories as exclusive as its watches.
TYPE OF BRACELETS OR STRAPS
AVAILABLE COLOUR
Luminor Alligator
Luminor Alligator nubuck
Luminor Assolutamente
Luminor Calf Cashmere
Luminor Calf Rugby
Luminor Caoutchouc
Luminor Ranger
Luminor Vintage
TELL A FRIEND
SEND